Operating instructions

Technical data
40 Operating instructions 22012836B 09/08
IND690-Fill
5 Technical data
Dispensing functions
Dispensing • Controlling of coarse and fine flow of material feed for liquid, pasty and pourable
weighing samples
• Learn mode: automatic determination of dispensing parameters (coarse and fine
feed)
• Redispensing correction: Optimization of the fine-feed shutoff point (limit 2)
• Tolerance check with automatic redispensing
• Manual redispensing via keypad
• Differentiation between below- and above-level dispensing
• Control of elements of a below-level dispensing system
Dispensing parameters • Entry of dispensing parameters either directly via keypad, by recalling from one of
999 fixed memories or via serial data interface
• Input format: up to 8 places including decimal point
• Tolerance input for certified scales ≤ national calibration regulations, for non-
certified scales up to maximum target value
Tare functions • Automatic tare compensation at start of dispensing
• Tare monitoring in accordance with specified value
Memory 999 target memories for frequently dispensed components
Status display Documentation of current dispensing process either with clear text or analog weigh-
in aid DeltaTrac or BIG WEIGHT DISPLAY
Item counter Up to 9,999, start value and stop value can be set as desired
Totalizing Net sum, gross sum, item counter, standard deviation, mean value, x
min
and x
max
Sum memory Up to 8 places including decimal point