Operating instructions

Dispensing functions
6 Operating instructions 22012836B 09/08
IND690-Fill
1.4 Dispensing process
Dispensing is carried out in 5 consecutive steps:
• Automatic tare – Automatic taring of the container and dispensing start
• Coarse feed – Dispensing with coarse feed up to the coarse/fine-feed switch-over
point (limit
1)
• Fine feed – Dispensing with fine feed up to the switch-off point of the fine feed
(limit
2)
• Redispensing correction – Redispensing correction of fine feed beyond limit 2
• Redispensing – If the weight value does not lie within the tolerance of the target
value at the end of dispensing, automatic or manual redispensing up to the target
value
If not limits are entered, the IND690-Fill automatically determines Limit 1 and Limit 2
in a learn mode, see page
20. The target weight is then exactly reached already
during the first dispensing.
To optimize the dispensing process, Limit 2 is automatically adjusted with the same
component during the next dispensing process, see REDISP. CORRECTION block on
page
16.
If the container is underfilled, manual or automatic redispensing can be carried out
depending on the settings in the master mode.