Operating instructions

Dispensing functions
Operating instructions 22012836B 09/08 9
IND690-Fill
1.6.2 Dispensing with filling container on the weighing platform
During dispensing the filling container on the weighing platform is filled from a
supply vessel.
1. Enter dispensing parameters, see section 1.5.
The display shows READY FOR DISPENSING.
2. Place empty filling container on the weighing platform.
3. Press START key.
The display shows the following: weight value, dispensing status and DeltaTrac.
When the dispensing process is completed, the display indicates whether the
weight value lies within the tolerance limits (DISPENSING OKAY) or outside
(OVERFILLED, UNDERFILLED).
The dispensing result is printed.
4. Relieve weighing platform.
If ACKNOWLEDGE ON is set in the master mode, the dispensing process is
acknowledged and the display shows READY FOR DISPENSING.