Operating instructions

Weighing made simple
15
3.2 Taring the balance
The weight of any weighing container can be “tared” at a keystroke to set the display to zero. The taring range covers the
entire weighing range of your balance.
If you wish to tare a container, place it on the weighing pan.
Close all draft shield doors.
Press the «#» key briefly to start the taring operation.
Taring runs automatically. If you tare the balance when it is unstable, the taring
procedure will be shown in the display by horizontal segments.
On completion of taring, the zero display appears and your balance is ready for
weighing.
Taring can be aborted by pressing the «#» key again when the balance
is in an unstable (not yet tared) condition.
------
0 g