Operating instructions

14
Using the menu
Opening the menu
In weighing mode, press and hold down the «Cal/Menu» key until “MENU” appears in the display. Release the
key: the 1st menu option is displayed.
Notes: The menu option “Reset” is only displayed if the balance is equipped with the optional RS232C
interface, otherwise “Unit 1” appears as first menu option.
Select menu options
The «±» key is used to select individual menu options with their current settings one after the other.
Change settings
The «“» key is used to change the setting at the selected menu option. Every time the key is pressed, the next
setting is displayed. Once the desired setting appears in the display, the next menu option can be selected (see
above) or you can close the menu (see following sections).
Saving settings and closing the menu
Hold the «Cal/Menu» key down until “StorEd” appears in the display. Release the key and the balance reverts
to weighing mode. All changes are saved.
Abort
Press the «C» key briefly. The balance reverts to weighing mode. Changes are not saved.
Note
If no entry is made within 45 seconds, the balance reverts to weighing mode. Changes are not saved.
rESEt
0.01 g
Ÿ≈EMU
Cal/Menu
à
rESEt
±
Unit 1 g
“
Unit 1 g
Unit 1 kg
0.01 g
STorED
Cal/Menu
0.01 g
C