Operating instructions

Weighing made simple

3.2 Zeroing the scale

As a result of environmental influences, your balance may not show exactly «0.0» even though the weighing pan is

unloaded. However, you can reset the display of your balance to zero at any time to ensure that the weighing really starts

at zero.

If you wish to tare a container, place it on the weighing pan.

Press the «#» key briefly to start the taring operation.

Taring runs automatically. If you tare the balance when it is unstable, the taring

procedure will be shown in the display by horizontal segments.

On completion of taring, the zero display and the symbol “Net” for net weight

appear. Your balance is again ready for weighing.

When the balance is unloaded, the stored tare value is shown with a negative

sign.

The current tare value remains stored until the next taring or zeroing or until the

balance is switched off.

------

The balance does not show exactly zero even though the weighing pan is un-

loaded.

Press the «

ÇÇ

Ç» key and the balance resets the display to zero.

3.3 Taring the balance

The weight of any weighing container can be “tared” at a keystroke to set the display to zero. The taring range covers the

entire weighing range of your balance.

Net