Manualshelf

Specifications

ManualsBrandsMettler Toledo ManualsDomestic AppliancesPS2+
21222324252627282930
Chapter 3: Configuring the Setup Parameters
Chapter 3: Configuring the Setup ParametersChapter 3: Configuring the Setup Parameters
Chapter 3: Configuring the Setup Parameters
Configuring Setup Parameters
Configuring Setup ParametersConfiguring Setup Parameters
Configuring Setup Parameters
(03/01) 3-
(03/01) 3-(03/01) 3-
(03/01) 3-5
55
5
• Normal
• Expanded – typically x10
• Classifier – weight classifier rounding
3.
3.3.
3.
Press UNITS to accept the displayed mode option. The PS continues to
the Filter program block.
Filter Program Block
Filter Program BlockFilter Program Block
Filter Program Block
The Filter program block lets you configure the noise filter that is used in
determining weight stability on the scale. The PS disregards environmental
noise such as vibrations that affect the weighing accuracy according to the
filter setting.
To configure the program block:
1.
1.1.
1.
Press UNITS to display the FiLtEr prompt, then press ZERO.
2.
2.2.
2.
Press ZERO to display the desired noise filter. Options include:
• Light
• Heavy
• Medium
3.
3.3.
3.
Press UNITS to accept the displayed filter option. The PS continues to the
Baud program block.
Baud Program Block
Baud Program BlockBaud Program Block
Baud Program Block
This program block lets you set the baud rate (the speed at which data is
transmitted in bits-per-second).
To configure the program block:
1.
1.1.
1.
Press UNITS to display the bAud prompt, then press ZERO.
2.
2.2.
2.
Press ZERO to display the desired baud rate. Options include:
• 300 • 4800
• 1200 • 9600
• 2400 • 19200
3.
3.3.
3.
Press UNITS to accept the displayed baud rate option. The PS continues
to the ASCII program block.
ASCII Program Block
ASCII Program BlockASCII Program Block
ASCII Program Block
The ASCII program block lets you select the number of bits that make up an
ASCII character. Most METTLER TOLEDO equipment communicates using
seven data bits.
To configure the program block:
1.
1.1.
1.
Press UNITS to display the ASCii prompt, then press ZERO.
Settling time increases with heavier
filter setting.