Specifications

METTLER TOLEDO PS Shipping Scale Technical/Operators Manual
METTLER TOLEDO PS Shipping Scale Technical/Operators ManualMETTLER TOLEDO PS Shipping Scale Technical/Operators Manual
METTLER TOLEDO PS Shipping Scale Technical/Operators Manual
(03/01)
03/01) 03/01)
03/01) 5-4
5-45-4
5-4
extends battery life. For prolonged battery life, turn the scale off when not in
use. Rechargeable Ni-Cad batteries can also be used.
WARNING!
Always remove all power before operating on any equipment.
Mettler-Toledo recommends that only qualified technicians open
the unit up for maintenance and repair. If you must open the PS,
read this section carefully to avoid damage to the internal
components.
1.
1.1.
1.
Remove the power and turn the PS over on the on the platter side. Be
extremely careful not to damage the display.
2.
2.2.
2.
Install the plastic D-cell battery holder P/N 13257500A. Attach with four
M3-0.5X8 Pan HD screws and washers. Note the polarity of the battery
holder and terminal positions.
Terminal
Ends