Specifications

Chapter 5:
Chapter 5: Chapter 5:
Chapter 5: Service and Maintenance
Service and MaintenanceService and Maintenance
Service and Maintenance
Installing the Base Mount Display
Installing the Base Mount DisplayInstalling the Base Mount Display
Installing the Base Mount Display
(03/01)
(03/01) (03/01)
(03/01) 5-7
5-75-7
5-7
Installing the Base
Installing the BaseInstalling the Base
Installing the Base
Mount Display
Mount DisplayMount Display
Mount Display
A base mount display unit (0270, 2-key indicator) can be installed if one was
not ordered initially for the PS shipping scale (PS60 and PS6L models only).
To install the base mount display:
1.
1.1.
1.
Attach the display unit to the bottom of the PS with the two M4 10mm
screws (P/N R0550100A) as shown below:
2.
2.2.
2.
Install the display interface harness from the display as shown. Insert the
display interface harness into the PCB as shown. Make sure to route the
cable as shown to prevent damage to the cable.