User's Manual

Removing liquid dosing head from liquid kit
− To remove the liquid dosing head, press it slightly upwards
and remove it to the front.
3.6 Connecting the tubes
Connectors of pump module
To Bottle
Pump
ExhaustInlet
CAN CANRS232CPower Supply
1 WARNINGContaminated air!
If you use toxic, explosive or flammable liquids, the exhaust
air will be contaminated and the device can get damaged.
Connect a tube to exhaust air outlet to absorb the air into a
safe container.
Note
Outer tube diameter: 6mm
12
CAUTION
Damage on tube connectors because of mishandling!
If the tubes are not removed correctly, the connectors and therefore the pump module
can get damaged.
− To remove tubes, press down ring on connector and pull out tube carefully.
16 Quantos Automated Dosing