User's Manual

2
Intended Use
Your Dosing System is used for weighing and dosing powder or
liquid samples. Use the instrument exclusively for this purpose.
Any other type of use and operation beyond the limits of technical
specifications without written consent from Mettler-Toledo AG, is
considered as not intended.
Certain samples require special care!
With certain types of samples, there is a possibility of danger to
personnel or damage of property. Please note that the user
always has the responsibility and liability for damage caused by
use of any types of samples!
3Operation
3.1Switching on and off
The instrument switches on automatically as soon as you pick it
up. The instruments can also be switched on by pressing the
dosing button.
The instrument will automatically switch off if you put down the
instrument for more than 15seconds or if you do not press the
dosing button for 45seconds.
3.2Dosing
– Insert dosing head.
Dosing light turns on.
– To couple, press once the dosing but
ton.
– Press the dosing button beyound cou
pling position.
Powder outlet opens.
Stirring and tapping will be actu
ated and powder flows.
If the dosing head which you insert is read and found to be valid
for use then the dosing light (white light next to the Powder Open