User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety information
- 3 Design and Function
- 4 Installation
- 4.1 Standard equipment
- 4.1.1 Scope of delivery
- 4.1.2 Unpack the titrator
- 4.1.3 Position the titrator
- 4.1.4 Adjust the angle of the terminal
- 4.1.5 Connect and disconnect the terminal
- 4.1.6 Connect the titrator to the power supply
- 4.1.7 Disconnect the titrator from the power supply
- 4.1.8 Set up the titrator for a general titration
- 4.1.8.1 Attach the titration stand to the titrator
- 4.1.8.2 Swivel the titration stand
- 4.1.8.3 Attaching and removing the titration vessel
- 4.1.8.4 Recommended positions for sensors, tubes and stirrers
- 4.1.8.5 Connect the compact stirrer
- 4.1.8.6 Connect the measuring electrode
- 4.1.8.7 Attaching the electrode arm
- 4.1.8.8 Insert and connect a burette
- 4.1.9 Connect a Rondolino TTL sample changer
- 4.1 Standard equipment
- 5 Operating the instrument
- 6 Transporting the titrator
- 7 Care and maintenance
- 8 Disposal
- 9 Technical data
3.2.2 Keypads
Alphabetic keypad Numeric keypad
Cancel
Preview
OK
Method ID
4
1
2
3
5
6
Cancel
OK
Enter auxiliary value
1
2
• Tap (1) to see how your input looks like.
• Tap (2) for capital letters.
• Tap (3) for lowercase letters.
• Tap (4) to switch to a numeric keypad and
(2) to turn back to alphanumeric.
• Tap (5) to delete all entered letters or
numbers.
• Tap (6) to delete the last entered letter or
number.
• Tap (1) to delete all entered numbers.
• Tap (2) to delete the last entered number.
3.2.3 Menu structure
Methods
The menu Methods has no submenus.
Series templates
The menu Series templates has no submenus.
Results
The menu Results has the following submenus.
• All results
• Statistics
• Samples
• Add result
• Recalculate
• Reevaluate
• Buffer
• Undo all
Setup
The menu Setup has the following submenus.
Menu level 2 Menu level 3
Chemicals Titrants
Auxiliary reagents
Calibration standards
Concentration and titer standards
Substances
11Titration Excellence