User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety information
- 3 Design and Function
- 4 Installation
- 4.1 Standard equipment
- 4.1.1 Scope of delivery
- 4.1.2 Unpack the titrator
- 4.1.3 Position the titrator
- 4.1.4 Adjust the angle of the terminal
- 4.1.5 Connect and disconnect the terminal
- 4.1.6 Connect the titrator to the power supply
- 4.1.7 Disconnect the titrator from the power supply
- 4.1.8 Set up the titrator for a general titration
- 4.1.8.1 Attach the titration stand to the titrator
- 4.1.8.2 Swivel the titration stand
- 4.1.8.3 Attaching and removing the titration vessel
- 4.1.8.4 Recommended positions for sensors, tubes and stirrers
- 4.1.8.5 Connect the compact stirrer
- 4.1.8.6 Connect the measuring electrode
- 4.1.8.7 Attaching the electrode arm
- 4.1.8.8 Insert and connect a burette
- 4.1.9 Connect a Rondolino TTL sample changer
- 4.1 Standard equipment
- 5 Operating the instrument
- 6 Transporting the titrator
- 7 Care and maintenance
- 8 Disposal
- 9 Technical data
Part Order number T5 T5C T7 T9
CD Titration User Documentation 30297239 • • • •
User Manual – • • • •
Memo Card – • • • •
Test report – • • • •
EC declaration of conformity – • • • •
Titrator bundles
Part Order number T5 InMotion
Flex
T5 Rondolino
Titrator – • •
Analog board 51109818 • •
AC adapter 30298362 • •
Power cable (country specific) – • •
Terminal WVGA 7inch AnaChem – • •
Triaxial SC LEMO cable 70cm 89601 • •
USB cable A-B 180cm 51191926 • •
Torx screwdriver 10 51191659 • •
14 Titration Excellence