User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety information
- 3 Design and Function
- 4 Installation
- 4.1 Standard equipment
- 4.1.1 Scope of delivery
- 4.1.2 Unpack the titrator
- 4.1.3 Position the titrator
- 4.1.4 Adjust the angle of the terminal
- 4.1.5 Connect and disconnect the terminal
- 4.1.6 Connect the titrator to the power supply
- 4.1.7 Disconnect the titrator from the power supply
- 4.1.8 Set up the titrator for a general titration
- 4.1.8.1 Attach the titration stand to the titrator
- 4.1.8.2 Swivel the titration stand
- 4.1.8.3 Attaching and removing the titration vessel
- 4.1.8.4 Recommended positions for sensors, tubes and stirrers
- 4.1.8.5 Connect the compact stirrer
- 4.1.8.6 Connect the measuring electrode
- 4.1.8.7 Attaching the electrode arm
- 4.1.8.8 Insert and connect a burette
- 4.1.9 Connect a Rondolino TTL sample changer
- 4.1 Standard equipment
- 5 Operating the instrument
- 6 Transporting the titrator
- 7 Care and maintenance
- 8 Disposal
- 9 Technical data
• No powerful electric or magnetic fields
4.1.4 Adjust the angle of the terminal
The angle of the terminal has twopositions.
− To increase the angle of the terminal, fold out
the two feet(1) at the underside of the terminal.
4.1.5 Connect and disconnect the terminal
Connect the terminal
§
The titrator has shut down.
1 Plug the supplied terminal cable into the socket in the back of the terminal.
2 Plug the terminal cable into the TERMINAL socket on the rear panel of the titrator.
3 Start up the titrator.
ð The titrator automatically detects the terminal and activates it.
Disconnect the terminal
§
The titrator has shut down.
1 Remove the terminal cable from the socket in the back of the terminal.
2 Remove the terminal cable from the TERMINAL socket on the rear panel of the titrator.
4.1.6 Connect the titrator to the power supply
WARNING
Danger of death or serious injury due to electric shock!
Contact with parts that contain a live current can lead to injury and death.
1 Only use a METTLER TOLEDO power cable and AC adapter designed for your instrument.
2 Connect the power cable to a grounded power outlet.
3 Keep all electrical cables and connections away from liquids.
4 Replace damaged power cables and AC adapters immediately.
16 Titration Excellence