User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety information
- 3 Design and Function
- 4 Installation
- 4.1 Standard equipment
- 4.1.1 Scope of delivery
- 4.1.2 Unpack the titrator
- 4.1.3 Position the titrator
- 4.1.4 Adjust the angle of the terminal
- 4.1.5 Connect and disconnect the terminal
- 4.1.6 Connect the titrator to the power supply
- 4.1.7 Disconnect the titrator from the power supply
- 4.1.8 Set up the titrator for a general titration
- 4.1.8.1 Attach the titration stand to the titrator
- 4.1.8.2 Swivel the titration stand
- 4.1.8.3 Attaching and removing the titration vessel
- 4.1.8.4 Recommended positions for sensors, tubes and stirrers
- 4.1.8.5 Connect the compact stirrer
- 4.1.8.6 Connect the measuring electrode
- 4.1.8.7 Attaching the electrode arm
- 4.1.8.8 Insert and connect a burette
- 4.1.9 Connect a Rondolino TTL sample changer
- 4.1 Standard equipment
- 5 Operating the instrument
- 6 Transporting the titrator
- 7 Care and maintenance
- 8 Disposal
- 9 Technical data
![](/manual/mettler-toledo/ti001/user-s-manual-english/images/img-29.png)
2 Tap Save series data(1) to save the current
sample series. Only the completed samples will
be saved.
ð If the maximum permitted number of series
has been reached, the series is not saved.
ð Sample data from a method that is waiting
in a queue can be saved by selecting
Suspend > Save series data.
3 Tap Skip sample(2) to skip the current sample
and continue with the next sample of the series.
ð The current sample is marked in Results as
Excl..
4 Tap Skip loop(3) to skip the loop and continue
with the next loop of the series.
ð The loop is marked in Results as Excl..
5 Tap Continue(4) to continue with the current
sample.
6 Tap Stop definitely(5) to stop the current
method.
Save series data
Continue
Stop
definitely
Tasks
1
2
3
4
Suspending options
Skip sample
Skip loop
5
Note
• If a Calib. loop is skipped, the analysis continues in accordance with the corresponding method
function Calibration.
• If required, it is possible to include a skipped sample (Excl.) into a statistic manually in the dialog
Results.
6 Transporting the titrator
If you transport the titrator over long distances, use the original packaging.
1 Empty all tubes.
2 Empty the titration vessel.
3 Shut down the titrator.
4 Unplug the titrator.
5 Remove all cable connections.
6 Remove the titration vessel from the titration stand.
7 Remove all tubes.
8 Remove all burettes.
9 Move the titrator to the new location.
7 Care and maintenance
7.1 Cleaning
Housing of the titrator
Clean the housing of the titrator using a cloth moistened with alcohol.
28 Titration Excellence