User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety information
- 3 Design and Function
- 4 Installation
- 4.1 Standard equipment
- 4.1.1 Scope of delivery
- 4.1.2 Unpack the titrator
- 4.1.3 Position the titrator
- 4.1.4 Adjust the angle of the terminal
- 4.1.5 Connect and disconnect the terminal
- 4.1.6 Connect the titrator to the power supply
- 4.1.7 Disconnect the titrator from the power supply
- 4.1.8 Set up the titrator for a general titration
- 4.1.8.1 Attach the titration stand to the titrator
- 4.1.8.2 Swivel the titration stand
- 4.1.8.3 Attaching and removing the titration vessel
- 4.1.8.4 Recommended positions for sensors, tubes and stirrers
- 4.1.8.5 Connect the compact stirrer
- 4.1.8.6 Connect the measuring electrode
- 4.1.8.7 Attaching the electrode arm
- 4.1.8.8 Insert and connect a burette
- 4.1.9 Connect a Rondolino TTL sample changer
- 4.1 Standard equipment
- 5 Operating the instrument
- 6 Transporting the titrator
- 7 Care and maintenance
- 8 Disposal
- 9 Technical data
1 Introduction
Thank you for choosing a METTLER TOLEDO Titration Excellence titrator. Titration Excellence titrators are
easy-to-operate instruments for titrations.
About this document
This document provides you with the information you need to get started with your METTLER TOLEDO titrator.
For a comprehensive description of the instrument and its functions, refer to the Operating
Instructions, supplied as PDF file on the CD.
The instructions in this document refer to titrators running firmware version 5.2.0 or higher.
If you have any additional questions, contact your authorized METTLER TOLEDO dealer or service represen-
tative.
u www.mt.com/contact
Conventions and symbols
Refers to an external document.
Note
for useful information about the product.
Elements of instructions
§
Prerequisites
1 Steps
2 ...
ð Intermediate results
ð Results
3Titration Excellence