Operating instructions

Settings for Adjustment and Tests

When “Test Sequences” is selected you are provided with a list of tests. Up to 12 Test Sequences can be conﬁgured. Select an undeﬁned

Test Sequence to be conﬁgured or the name of a Test Sequence whose parameters you wish to update.

A complete list of all parameters of the 12 test sequences can be printed out by pressing the «F» key while the test sequence

list is open.

3.2.1 Test Sequence Parameters

Once you have selected a Test Sequence the following parameters can be conﬁgured. The weights required for the test weights must

be previously deﬁned in the Test/Adjust Weights menu.

Note: The Test Sequence is saved by pressing “OK” on the Test Sequence

menu.

Note: Each time the Test Sequence is saved the Version number will be incre-

mented by 1. The version number is indicated on the top right hand corner of

the display when the relevant Test Sequence is open.

Note: The SERVICE Method does not require a test weight.

“Name”: The Test Sequence Name can be freely deﬁned and is intended to be an easily recognizable form for

the user to ensure clear identiﬁcation and easy traceability.

Max. 20 characters!

Test Sequences Setup

Sensitivity Define

Test Sequence 2 Define

Test Sequence 3 Define

Test Sequence 4 Define

Test Sequence 5 Define

Test Sequence 6 Define

Test Sequence 7 Define

Test Sequence 8 Define

Test Sequence 9 Define

Test Sequence 10 Define

Test Sequence 11 Define

Test Sequence 12 Define

Test Sequence

Sensitivity

Setup

Version 2

Name Sensitivity

Preparation Instructions Standard

Method SE1

Action if Failure Warning

Instructions if Failure Standard

Code to Unblock Z

Entry in GWP History Yes