Operating instructions

Settings for Adjustment and Tests
37
Select the box to have the relevant information included i.e. when a box is ticked, the information will be printed. “STD” restores the
factory default settings. “OK” saves your modifications. “C” exits the menu without saving. The following record information can be
included in the report:
“Date/Time”: The date and time of the adjustment are printed in the defined date and time format. Date and Time
settings can be found in section 3.6 of the Operating Instructions – Part 2 for XP Balances.
“User”: The name of the user profile which was active when the adjustment was made (not for automatic
ProFACT adjustment).
“Balance Type”: This information describes the weighing platform and the terminal and cannot be changed by the
user.
“SNR”: The serial numbers of both the terminal and the weighing platform. This information cannot be changed
by the user.
“SW-Version”: Two numbers for the balance firmware, one for the terminal and one for the weighing platform.
“Balance ID”: The identification number of the balance. Balance Information Settings can be found in section 3.4
of the Operating Instructions – Part 2 for XP Balances.
“Weight ID”: The identification number of the external test weight used (section 3.1.1).
“Certificate No.”: The number of the certificate relating to the external test weight used (section 3.1.1).
“Temperature”: Temperature at the time of the adjustment or tests.
“Nominal Weight”: The actual weight of the external test weight used for the adjustment/test (section 3.1.1).
“Actual Weight”: The actual weight recorded of the external test weight (only when testing using an external test
weight).
“Difference”: The difference between the nominal weight and the actual weight (only when testing using an external
test weight).
“Levelcontrol”: States whether the balance is leveled correctly.
“Signature”: An additional line is printed for signing the record.
Factory setting: “Date/Time”, “User”, “Balance Type”, “SNR” (serial number), “Nominal Weight”, “Actual Weight”, “Differ-
ence” and “Signature” are activated.