Service manual

12
ECONOMY COUNTING SCALE
Temporarily Disable the Alarm Beep
For all functions, the alarm beep can be deactivated by pressing the key . Pressing again will
reactivate the alarm beep.
Weight Alarm within a Range
If weight alarm within a range is activated in the Setup Mode, press the key
to set the alarm range. The
QTY window displays ‘Lo 1’ to remind you to enter the lower limit of the alarm range. The entered lower
range is displayed in the APW window (e.g. 0.500 lb). Press the key
to confirm the lower limit. The
QTY window now displays ‘Hi 1’ to remind you to enter the upper limit of the alarm range (e.g. 1.000 lb).
Press
to complete the alarm range setting.
If the weight on the scale is within the alarm range (e.g. 0.800 lb on the scale, i.e. ≥ 0.500 lb and ≤
0.1000 lb), the scale will beep continuously, and the cursors “Lo” and ”Hi” will be lit. If the weight on the
scale is less than the lower limit, the cursor ‘Lo’ will be on. The ‘Hi’ is on when the weight is higher than the
upper limit.
Weight Alarm beyond a Range
If weight alarm beyond a range is activated in the Setup Mode, press
to set the alarm range. The QTY
window displays ‘Lo 1’ to remind you to enter the lower limit of the alarm range. The entered lower range is
displayed in the APW window (e.g. 0.5 lb). Press
to confirm the lower limit. The QTY window now
displays ‘Hi 1’ to remind you to enter the upper limit of alarm range (e.g. 0.1000 lb). Press
to complete
the alarm setting. If the weight on the scale is beyond the alarm range (e.g. 1.200 lb on the scale, i.e. <
0.500 lb or > 0.1000 lb) the scale will beep continuously. The cursor “Lo” will be on if the weight on the
scale is less than the lower limit. The ‘Hi’ cursor is on when the weight is higher than the upper limit.
Quantity Alarm
The two quantity alarms (within a range/beyond a range) work the same way as the weight alarms. Instead
of “Lo 1” and ‘Hi 1’, “Lo 2” and ‘Lo 2’ are indicated.