Service manual

ECONOMY COUNTING SCALE
7
1. Place the scale on a flat surface.
2. Remove the protective screws (only for the 6 lb and 15 lb
scales)
3. Mount four rubber gaskets onto each spider foot (only for
the 6 lb and 15 lb scale).
4. Put the platter on the spider (aluminum plate). Ensure that
the platter is properly aligned.
5. Connect the scale to the power outlet using the included
adapter.
6. Level the scale by adjusting the four rubber feet until the
leveling bubble is centered in the level indicator.
Proper alignment Improper alignment
7. Turn on the scale.
8. The scale should be running for about fifteen (15) minutes
before operation.
The windows display from 0-9, the
software version No. and ‘----‘.
The cursors of stab and 0 are on.