User manual

• surface-mounted, unequipped module housing for

individual modules in modul design

• solid steel sheet housing

• upper part of the housing powder-coated in RAL 9010

• upper part of the housing can be put on and removed

easily because no screws are used for fastening

• equipotential bonding possible by means of contact pin

• additional strain relief on lower part of housing using

cable ties

• suitable for direct wall mounting, as desktop device

and for DIN-rail mounting using the DIN rail adapter

mini FS

• bottom of the 3-port and 4-port housing can be

removed. Additional fastening by means of 60 mm

fastening clearance.

• optionally available and fits in all housings:

mini splice tray 130861-MSK-E

• optionally available 2 x 12 housing:

Strain relief for patch cords 130861-24ZE-E

• variants: 3, 4, 6, 8, 12, 16 and 2 x 12 ports

PAGE 1
• surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • equipotential bonding possible by means of contact pin • additional strain relief on lower part of housing using cable ties • suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini