Montageanleitung Installation Instructions System Cat.6A Anschlussdosen Cat.6A Wall Outlets BTR NETCOM GmbH Im Tal 2 78176 Blumberg / Germany Tel. +49 7702 533-0 Fax +49 7702 533-433 www.btr-netcom.
Kabelkonfektion Cable Preparation System 1a 3 Kabelmontage Cable Connection System 5a 7a max 30 m . m 7 weiß/white 8 braun/brown 3 weiß/white 6 orange/orange Kunststoffmantel ca. 25 mm (max. 30 mm) abisolieren. Remove about 25 mm (max. 30 mm) of the plastic sheath. Geflechtschirm nach hinten legen ... Fold braided shield backwards ... weiß/orange white/orange Kabelseite 2 / cable end 2 ... und gleichmäßig um den Kunststoffmantel drehen. ... and wrap it evenly around the plastic sheath.
Kabelmontage Cable Connection System 9 Montage in Kabelkanal Cable Conduit Mounting Demontage Disassembly Demontage Disassembly Lösen des Moduls Modul mittels Schraubendreher entriegeln und aus dem Tragrahmen nehmen. Detach the Module Unclip the module with a screwdriver and take it out of the support. Ladestück mit einem kleinen, flachen Schraubendreher entriegeln ... Unclip the loader using a small, flat-bladed screwdriver ...
Beschaltungshinweise Pin/Pair Assignment System Beschaltung nach ISO/IEC 11801, EN 50173 Bitte beachten Sie die Farbkodierung für die Verdrahtung gemäß TIA/EIA-568A. Pin/pair assignment according to ISO/IEC 11801, EN 50173 Please note colour coding for wiring per TIA/EIA-568A.