User Manual

MECABLITZ 28 CS-2 DIGITAL
28
In detaIl
Easy control with
the +/- buttons
Perfect for mounting on
the integrated, extendible
telescopic bracket
Clearly laid out
display
GNof28atISO100/21°(85mm)
GNof22atISO100/21°(35mm)
Flash output
•max.GNof28forISO100/21°
and 85 mm
Basic configuration
•Servomode:ashunitexposure
via built-in camera flash or
additional external flash unit
•LCDdisplay
•ashreadinessandexposurecontrol
indicator on the unit
•ashrangeindicatorintheLCD
•illuminationfrom24mm(wide-angle
diffuser) up to 85 mm (telephoto
attachment)
•automaticunitswitch-off
Standard flash modes
•automaticashmodewith
8 automatic apertures
•manualashmodewith4partial
lighting levels
•EasyMode:manualexposurecorrection
with +/- buttons
servo mode and the smart EASY
mode. For the very first time the flash
result can be directly manipulated via
the immediate correction buttons (+/-).
Simply shoot, check the result on the
camera screen and adjust straight
away as required – all at the touch of
a button. Thanks to this servo model
you can increase your flash power
without any undesired side effects.
The compact tool draws its power
from either universally available alka-
line micro batteries or equally com-
petitive rechargeable micro batteries.
Flash with a fun factor:
Have you ever been upset due to
photographs that are too dark,
because the integrated flash in your
camera was once again inadequate?
Wouldn’t you like to have a handy
flash unit that can also be used sepa-
rate from the camera once in a
while? Then Metz has the perfect
solution for you! Let the curtain rise
for the Metz mecablitz 28 CS-2
digital, with technology and a size
that have been optimally matched to
compact digital cameras. The fun
factor is increased by the self-learning
For the imaginative
36