User Manual

|
www.metz.de
mecablitz 15 MS-1 digital
Bounce diuser included as
standard to soen light.
Dot matrix display
Wireless TTL flash
3-stage swivel reflector
* A master flash unit is required to make use of TTL mode in remote mode. Subject
to manufacturer and camera model, the integrated flash or an external flash unit is
equipped with this TTL-specic master function, for example the Metz  AF- or the
Metz  AF-. Find out more at www.metz.de.
NIKONCANON
OLYMPUS PENTAXPANASONIC SONY
Flash output
• Max. guide number  (meters),
Max. guide number  (feet)
for ISO /° and  mm
Basic conguration
• Dual reflector system, can be individually
swivelled (°, °, °) and controlled
separately
• Ratio (light distribution from le to right)
:, :, :, :, :, :, :
• Dot matrix display
• nd shutter curtain synchronisation
(subject to camera)
• Slow synchronisation (Slow)
• Autofocus auxiliary light
Standard flash modes
• Wireless servo flash mode with/without
pre-flash suppression
• Servo mode with learning function
• Manual flash mode (operation via sync
socket/servo)
Ready for the future
• Firmware update via integrated USB socket
Power supply
•  × AAA (Micro) alkaline magnesium
batteries (.V)
•  × AAA (Micro) NiMH/NC rechargeable
batteries (.V)
•  × AAA (Micro) lithium batteries (.V)
Included as standard
• Bounce diuser
• Adapter ring  mm,  mm,  mm
(optionally available:  mm,  mm,  mm)
• IR lter bracket
• Belt pouch
Camera-specic
system flash modes
• Wireless TTL flash control, remote slave
mode selectable for:
Canon
• E-TTL / E-TTL II flash mode
Nikon
• i-TTL flash mode
Olympus
• RC system
Pentax
• P-TTL flash mode
Sony
• DSLR remote flash mode