Instruction manual

123
ķ
Beep signals when adjusting automatic mode settings:
• A short beep signal as an alarm in automatic mode indicates that the apertu-
re and ISO settings exceed the permissible light control range. The auto aper-
ture of the mecablitz is then automatically adjusted to the next permissible
value.
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Use the and buttons to select „BEEP“ from
the menu. The selected menu item will be highlighted
against a dark background.
• Press the button to confirm the special func-
tion selection.
• Choose the setting desired using the and
arrows. The setting takes effect immediately.
• Press repeatedly to return the display to its nor-
mal reading. If the key not pressed, the display
will switch back to normal automatically after
approximately 5 seconds.
When the beep function is turned on,
the symbol is also displayed on the
LC display.
☞


Set


Sel
7.3 Flash Bracketing Series (FB)
A series of flash exposures (flash-bracketing FB) can be carried out in the
and automatic flash modes. A flash bracketing series consists of
three successive flash shots with different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the
display. The possible correction values range from 1/3 to 3 apertures in one-
third aperture increments.
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Select the menu option „FB“ by pressing the and
buttons. The selected menu option will be high-
lighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and but-
tons. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button is not
pressed, the display is automatically reset to its
normal view after about 5 seconds.


Set


Sel
A
TTL
Select
Remote
Beep


Set
☛
☛
ON


Set
☛
P F 4.0
MZoom 24
10 m ISO 200
TTL
Select Remote
Standby
FB


Set
☛
☛
FB
1
1
/3


Set
☛
☛
709 47 0237.A1 58AF-2 Pen/Sam 27.07.2010 15:17 Uhr Seite 123