Instruction manual

129
ķ
7.3 Flash Bracketing Series (FB)
A series of flash exposures (flash-bracketing FB) can be carried out in the
and automatic flash modes. A flash bracketing series consists of
three successive flash shots with different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the
display. The possible correction values range from 1/3 to 3 apertures in one-
third aperture increments.
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Select the menu option „FB“ by pressing the
and buttons. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and but-
tons. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button is not pres-
sed, the display is automatically reset to its normal
view after about 5 seconds.


Set


Sel
A
TTL
• The first shot is taken without a correc-
tion value.
„FB 1“ will also appear on the display.
• The second shot is taken with minus correction.
„FB 2“ and the minus correction value (EV) will also appear on the display.
• The third shot is taken with plus correc-
tion. „FB 3“ and the plus correction
value (EV) will also appear on the
display.
• After the third shot, the flash bracketing series is automatically deleted.
„FB“ will disappear from the display.
When the flash bracketing series is set, the correction value is always
shown as a positive value!
Flash bracketing series in the TTL flash mode
A flash bracketing series in the TTL flash mode is only possible if the camera
supports the setting of a manual flash exposure correction on the flash unit (see
camera instruction manual)! Otherwise, the shots are taken without a correction
value!
Flash bracketing in automatic flash mode A
The type of camera is not important for a flash bracketing series in automatic
flash mode A.
7.4 Extended Zoom Mode (Zoom Ext)
In the extended zoom mode, the focal length of the main reflector is reduced to
one level below the focal length of the camera lens. The resulting broader light
coverage provides additional dispersed light (reflections) inside rooms so that a
softer flash illumination is possible.
☞
Select Remote
Standby
FB


Set
☛
☛
FB
1
1
/3


Set
☛
☛
F 5.1
AZoom 28
7.7 m ISO 100
FB1TTL
FB1
F 5.1
AZoom 28
7.7 m EV–
1
/3
FB2TTL
EV–
1
/3
709 47 0159.A1 58AF-2 Ni Print 26.07.2010 14:13 Uhr Seite 129