Instruction manual

102
ķ
If necessary, the Auto OFF function can be set to occur after 1 minute of inactivi-
ty, or can be deactivated (see 7.10).
4 Display illumination
Every time a button on the flash unit is pressed, the flash display illumination is
activated for 10 seconds. When a flash is fired via the camera or a hand
release, the display lightning
on the flash unit is switched off.
5 Operating modes (mode menu)
The flash unit supports with measuring preflash, automatic , manual
, and stroboscope modes .
Depending on the type of camera, other flash modes may be supported.
These flash operating modes can be selected and activated in the mode
menu following a data transfer with the camera. Depending on the
system, some camera models (depending on the camera's operating
mode) only support the TTL flash mode. Other flash modes (automatic A,
manual M etc.) cannot be selected or activated!
M
ATTL
5.1 Adjusting procedure for flash operating modes
• Press the „Mode“ button until the word „Mode“ appears on the display. You
can choose from the following operating modes:
TTL flash mode with measuring preflash
HSS TTL - flash mode with high speed synchronisation HSS
Automatic flash mode
Manual flash mode
HSS Manual flash mode with high speed synchronisation HSS
Stroboscope flash mode
• Set the flash mode of your choice ( , automatic
, manual , etc.) using the
and keys. The flash mode you choose is
then highlighted. The settings take effect immediately.
• Press the button , and the display changes back
to the normal view. If the button is not pressed,
the display will change back to the normal view after
about 5 seconds.
The flash parameters for ISO, aperture and lens focal length or mirror position
are set automatically, if the camera transfers the necessary data to the flash unit.
The range indicator on the display of the control unit matches the flash parame-
ters transferred from the camera.
If the camera does not transfer one or more flash parameters to the flash
unit, you will have to adjust these settings by hand (see 6).
MA
TTL
M
M
A
TTL
TTL
Mode TTL HSS
A
M
Set
A
709 47 0229.A1 58AF-2 Oly/Pana 29.07.2010 10:46 Uhr Seite 102