Instruction manual

108
ķ
6.4 Manual partial light output (P)
In the manual mode and the strobe mode , the light output can also be
adjusted to fit the shooting situation with the manual partial light output para-
meter (P). Settings in manual flash mode M range from P 1/1 (full light output)
to P 1/256, in intervals of 1/3.
Setting procedure:
• Press the button until „P“ appears on the
LC display.
• Set the desired light output (1/1-1/256) with the
or buttons. The setting takes effect immedi-
ately.
• Press the button to change the LC display back to
the normal view. If the button is not pressed, the
display will change back to the normal view after
about 5 seconds.
In strobe mode , the maximum partial light output is automatically
adjusted to fit the flash parameters chosen.
In strobe mode , reduction of the manual partial light output is only
possible in full intervals.
When the number of flashes (N) and the flash frequency (f) are reset, the
partial light output is not reset.
+
Para
M
7 Special functions (Select menu)
Special functions are selected using the (Select) button. Depending on the
camera model and flash mode set, various special functions are available. If
certain special functions are not supported by your camera, these functions may
not be displayed in the menu. Also see table 2 for more information.
7.1 Setting procedure for the special functions
• Press the button repeatedly until „Select“
appears on the display.
• Use the and arrows to select the item of
your choice or special function from the menu. The
selected menu item will be highlighted against a dark
background.
The following special functions are available, depen-
ding on the mode and camera model:
Sel
Sel
F8.0
MZoom 35
6,1 m P1/8
M
Para
+
F8.0
MZoom 35
17 m P1/1
M
Para
+
Beep
FB
ZoomExt
Remote
m / ft
ML
Standby
KEYLOCK
Beep
-
ZoomExt
Remote
m / ft
M/M HSS
ML
Standby
KEYLOCK
Beep
-
ZoomExt
ZoomSize ZoomSize ZoomSize
Remote
m / ft Table 2
-
ML
Standby
KEYLOCK
TTL/TTL-HSS/A
Select
Beep
Mode Para Sel
709 47 0229.A1 58AF-2 Oly/Pana 29.07.2010 10:46 Uhr Seite 108