Instruction manual

112
ķ
7.6 Cordless remote mode (Remote)
• When „Remote OFF“ appears, the cordless remote mode is deactivated.
• When „Remote Slave“ appears, the flash unit is operating completely as a sla-
ve flash unit. See also Section 18.
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Select the „Remote“ menu option by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button is not pres-
sed, the display is automatically reset to its normal
view after about 5 seconds.


Set


Sel
7.7 Meter-Feet changeover (m/ft)
The maximum flash range indicated by the flash unit’s display can either be
shown in meters or feet. The setting can be adjusted under the menu option
m/ft.
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Select the „m/ft“ menu option by pressing
the and keys.
The selected menu option will be highlighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and
keys. The setting takes effect immediately.
– When „m“ is displayed, distances will be shown
in meters.
– When „ft“ is displayed, distances will be shown in
feet.
• Press the button repeatedly until the display is
reset to its normal state. If the button
is not pressed, the display is automati-
cally reset to its normal view after about
5 seconds.


Set


Sel
Para Sel
SLAVE
GROUP:A EZoom 50
CHANNEL:1
Select BEEP
FB
Remote


Set
☛
☛
Remote
Slave


Set
☛
Select Zoom Ext
AF-BEAM
m/ft


Set
☛
☛
m


Set
☛
F4.5
AZoom 70
14 m ISO 200
A
m
709 47 0229.A1 58AF-2 Oly/Pana 29.07.2010 10:46 Uhr Seite 112