Instruction manual

ķ
6.3 Main reflector position (Zoom)
If there is no digital data transfer between the camera and flash unit, the reflector
positions
24 mm - 28 mm - 35 mm - 50 mm - 70 mm - 85 mm - 105 mm (35mm format
24 x 36) can be set manually.
MZoom will then appear in the LC display.
Setting procedure:
• Press the button (Parameters) until „Zoom“
appears on the LC display.
• Set the desired value using the / buttons.
The setting takes effect immediately.
• Press the button to change the LC display back to
the normal view. If the button is not pressed, the
display will change back to the normal view after
about 5 seconds.
During digital data transfer between the camera and flash unit, the main reflec-
tor positions are adjusted automatically.
AZoom will then appear in the LC display.
–
+
Para
6.4 Flash exposure correction (EV)
Manual flash exposure correction (EV) can help offset extreme differences in
contrast between the subject and background. Corrections from -3 f-stops (EV) to
+3 f-stops (EV) can be made, in 1/3 increments (also see 10.5).
Setting procedure:
• Press the button (Parameters) until „EV“ flashes
on the LC display.
• Set the desired EV value using the / but-
tons. The setting takes effect immediately.
• Press the button to change the LC display back to the normal view. If the
button is not pressed, the display will change back to the normal view
after about 5 seconds.
–
+
Para
124
F8.0
MZoom 70
8.1 m ISO 200
A
Para –
+
F8.0
MZoom 35
6.1 m ISO 200
A
Para –
+
☛
☛
F8.0
MZoom 35
6,1 m EV+2
A
Para –
+
☛
F8.0
MZoom 35
12 m EV 0
A
Para –
+
☛
709 47 0210.A1 58 AF-2 Canon 29.07.2010 10:21 Uhr Seite 124