Instruction manual

130
ķ
Setting procedure:
• Press the button repeatedly until „Select“
appears on the display.
• Select the menu option „ZoomSize“ by pressing the
and keys. The selected menu option will
be highlighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button is not pres-
sed, the display is automatically reset to its normal
view after about 5 seconds.
Once the Zoom Size mode is activated,
„SZoom“ will appear on the display next to
the focal length.
Refer to your camera’s instruction manual for further information.
The Zoom size function cannot be set with cameras which do not support
shooting format adjustment!
☞
☞


Set


Sel
7.7 Cordless remote mode (Remote)
• When „Remote OFF“ appears, the cordless remote mode is deactivated.
• When „Remote Master“ appears, the flash unit is operating as a guiding
master flash unit on the camera.
• When „Remote Slave“ appears, the flash unit is operating completely as a sla-
ve flash unit. See also Section 19.
Setting procedure:
• Press the button repeatedly until „Select“ appe-
ars on the display.
• Select the „Remote“ menu option by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
• Select the desired setting with the and
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button is not pres-
sed, the display is automatically reset to its normal
view after about 5 seconds.


Set


Sel
Select Zoom Ext
m/ft
Zoom Size


Set
☛
☛
F 5.0
SZoom 35
12 m
TTL
SZoom
Size ON


Set
☛
Select BEEP
FB
Remote


Set
☛
☛
Para Sel
CH1
TTL AZoom 28
TTL+
1
/
3
F32
B
A
M
Remote
Master


Set
☛
709 47 0210.A1 58 AF-2 Canon 29.07.2010 10:21 Uhr Seite 130