TV. VIDEO. AUDIO. Operating instructions

Press this key on the remote
control....
The screen displays Explanation
19
Programme StdPict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
696+06A-GB
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
—
—
—
—
Sound
—
—
—
—
Volume adjustment
Forced mono
+00
Off
store ?
OK
TV station table
?
MENU
return Help
TV
picture
Programme StdPict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
696+06B-GB
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
—
—
—
—
Sound
—
—
—
—
Volume adjustment
Forced mono
+00
Off
store ?
OK
TV station table
?
MENU
return Help
TV
picture
6. Volume adjustment and forced mono
It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme
positions are identical. To overcome this problem, you can set a volume correction factor for each programme position.
Example:
Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as
Programme 3.
Switch over to programme position 1.
1. Call the sound submenu
and adjust the volume
2. Set forced mono
3. Store the setting and return
to TV picture
In this submenu, you can assign a volume correction
factor to a programme position and, if necessary,
activate forced mono sound mode.
A volume correction factor can be set with the keys
when the text is displayed on a blue background.
Press the key to enter a positive correction factor
which is added to the standard volume value (increa-
sing the volume). Press the key to enter a negative
correction factor which is subtracted from the
standard volume value (decreasing the volume).
In our example:
Press the key and increase the volume until it is the
same as the volume on Programme 3. The resulting
correction factor could , for example, be displayed as 05.
+
-
+
+
-
It may happen that the TV set inadvertently switches
from mono to stereo during a transmission,
although no stereo programme is being received.
This usually depends upon the prevailing reception
conditions.
Use the keys to select forced mono.
If this setting is stored, all transmissions received in
this programme position will always be reproduced in
mono.
+
-
All changed settings are stored.
+
-
+
-
OK
TV
red
yellow
yellow
white