User's Manual

Backlight on the TV set

In rare, exceptional cases, the backlight remains off when

switched on with the key. The reason for this is that the

protective circuit has cut off the current to the lamp.

If this happens, and if you have pressed the key several

times, you do not know whether the backlight is switched on

or off. To determine this, switch the TV set to standby mode

with the key.

In standby mode, the display shows:

- a red dot for standby mode with the backlight off;

- the text „LAMP ON“ for standby mode with the backlight

on.

If „LAMP ON“ is displayed and the backlight does not light,

switch it off by pressing the key - the red dot is now dis-

played.

Wait for at least 10 seconds and then press the key to

switch the backlight on.

If the backlight still does not light, there is a technical fault in

the TV set.

Safety note

If there is a technical fault in your TV set, the complete lamp

assembly must be replaced by a trained technician!

The TV set may be opened and repaired only by a trained

technician.

CAUTION! DANGER OF ELECTRIC SHOCKS

Please have your TV set repaired by your local dealer.

Cleaning notes for glossy surfaces

Cleaning:

- Clean with a soft, antistatic cloth or

- with a damp cloth and a mild detergent.

Polishing:

- Polish with a soft cloth and furniture polish.

- Minor scratches can be removed with car polish (type for

as-new paintwork without abrasives).