Operation Manual

heard to snap into place on the hot shoe.
• Lightly press the unlatching button “PUSH” upward to
clamp the mecablitz in the camera’s accessory shoe.
3.2 Removing the mecablitz from the camera
Turn off the camera and the mecablitz by their main switch.
mecablitz 24 AF-1 C, 24 AF-1 N, 24 AF-1 P and 24 AF-1 O
•
Press both side plastic catches   on the connection foot in
the direction indicated by the arrows and pull off the meca-
blitz at the same time from the camera accessory shoe.
mecablitz 24 AF-1 S
• Press the unlatching button “PUSH” towards the flash unit
and at the same time hold it lightly down until the
“PUSH” button locks in place.
• Withdraw the mecablitz from the camera’s accessory shoe.
4 Power supply
4.1 Suitable batteries
The mecablitz can be operated with any of the following bat-
teries:
• 2 NiCad batteries, type IEC KR6 (AA). They permit very
fast recycling and are economical in use because they are
rechargeable.
• 2 nickel metal hydride batteries IEC HR6 (AA). They have a
significantly higher capacity than NiCad batteries and are
less harmful to the environment (no cadmium).
• 2 alkaline manganese dry-cell batteries, type IEC LR6 (AA).
Maintenance-free power source for moderate power re-
quirements.
☞
89
ķ
709 47 0261.A2 24AF-1CNOPS 14.12.2010 13:27 Uhr Seite 89