Operation Manual

If flash exposure was correct, the “o.k.” exposure confirma-

tion lights up.

The TTL flash mode is supported by all camera modes (e.g.

Full Auto Mode, Program P, Aperture Priority Mode “Av” or

“A”, Shutter Priority Mode “Tv” or “S”, Programmed Image

Control Modes, Manual Mode “M”, etc.).

To test the TTL function a film must be loaded in the

camera. When selecting the film please check whether

limits regarding maximum film speed are applicable to

the given camera when in TTL mode (refer to the

camera’s operating instructions).

5.6.1 Automatic TTL fill-in flash in daylight

Most camera models automatically activate the fill-in flash

mode when in Full Auto Mode, Program P, and the

Programmed Image Control Modes in daylight (see the

camera’s operating instructions).

Fill-in flash overcomes troublesome dense shadows and pro-

duces a more balanced exposure between subject and back-

ground with contre-jour shots. The camera’s computer-con-

trolled metering system sets the most suitable combination of

shutter speed, working aperture and flash output.

Ensure that the contre-jour light source does not shine

directly into the lens as this will mislead the camera’s

TTL metering system!

In this instance there is no setting or display on the mecablitz

for automatic TTL fill-in flash.

☞

709 47 0261.A2 24AF-1CNOPS 14.12.2010 13:27 Uhr Seite 96