User's Manual

41
20. Special functions
Picture-in-picture (PIP)
Call the menu
The remote control unit has three function keys: F1
and F3. These keys are pre-programmed in the
factory.
The PIP picture can be used to display a second
TV station or the picture from an AV device.
Calling picture-in-picture (PIP) function:
• If "F1" is already programmed with
the function "Picture in picture", briefly
press the "F1" key; otherwise, hold the
"F1" key depressed until "Special func-
tions 1" is displayed and then press
the  key to display the PIP picture.
• You can shift the PIP picture with the
cursor control keys   . The current
position is saved.
• With the "OK" key, you can switch the
PIP frame to active (red) or inactive
(white).
• The contents of the PIP picture can be changed
only when the PIP frame is active (red).
If this is the case, you can use the numeric keys
or the "P+/P-" rocker key to select another pro-
gramme position for display in the PIP picture.
To display the picture from an AV device con-
nected to the TV set, press the "AV" key and
then select the AV device with the numeric keys.
• Pressing the red key exchanges the two pic-
tures.
• Pressing the green key causes the PIP picture
to be displayed as the large picture and termi-
nates the PIP function.
• To remove the PIP picture from the screen, press
the „TV“ key.
If a recording has been programmed in the
timer menu, the program being recorded is
displayed in the PIP picture when the PIP
function is activated.
☞
F1
Special
Functions 1
PIP on
9-programme on
Picture format



1
OK