User's Manual

72
Tone settings
You can switch the tone settings between „Nor-
mal“ and „Speech“.
Volume correction
The sound signals from different stations may vary
considerably in their volume. You can correct the
volume of a particularly loud or soft station so that
it is similar to that of the other stations. The volume
correction remains active even when the standard
values are recalled.
Standard settings
Standard settings are all values (such as bright-
ness, volume, chrominance, etc.) which are the
same for all programme positions.
Spatial sound
An artificial stereo effect can be generated for
mono transmissions.
Noise reduction
This setting can be used to improve the quality of
pictures with „snow“ or other noise resulting from
poor reception conditions. Depending on the
amount of interference, various correction facilities
are available and the noise reduction can be set
individually for each programme position.
VCR
The VCR function ensures optimum picture quality
when playing back recordings from tape devices
such as camcorders and video recorders.
Video level (optional)
The video level adjustment can be used to achieve
a uniform contrast for Sat stations with varying
modulation levels. However, this adjustment affects
only the signal at the EURO sockets and the cor-
rect setting must be determined by trial and error
(by making test recordings).
35. Glossary