User Manual

153
k
10.3 Slave flash mode
The flash unit supports Pentax wireless P-TTL
Remote System in slave flash mode.
At the same time, one or more slave flash units can
be remotely controlled from one master/controller
flash unit on the camera (e.g. meca-blitz M400 P).
So that multiple remote systems in the same room
do not interfere with one another, there are four
independent remote channels available (CH 1, 2, 3
or 4).
Master/controller and slave flash units belonging to
the same remote system must be set to the same
remote channel.
The slave flash units must be able to receive the
light from the master flash unit with the integrated
sensors

for the remote mode .
Depending on the camera model, the camera’s
internal flash unit can also function as master flash
unit.
In slave mode, there is no indication of reach and
no automatic adjustment of the zoom position.
10.3.1 Slave flash mode settings
• Switch on the flash unit with the

button. The start screen appears.
• Press the  button and the drop-down
menu will appear..
• Use the  buttons to select the
operating mode.
• Press the
°  button and confirm the selected
operating mode.
Remote slave mode is set.
In addition, the selected emote channel (e.g. CH. 1)
are displayed.
SLAVE
MODE
CONTR.
SLAVE
SERVO
CH. 1
EV
SLAVE
+