User Manual

156
k
10.4.2 Pre-flash suppression or
synchronisation settings
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to select the desired syn-
chronisation mode.
Synchronisation without pre-flash
Synchronisation with pre-flash
• Press the °  button and confirm the selected
setting.
The mode of operation is adopted.
If the synchronisation set here does not work pro-
perly, then proceed as described in 10.4.4.
OPT.
SYNC
10.4.3 Servo mode partial light output
settings
• Use the  buttons to set the desired partial
light output (P).
The partial light output is adopted.
Once the slave flash units have achieved flash-rea-
diness, the AF measurement flash flashes.
Slave groups and remote channels cannot be set in
SERVO mode.
The camera flash unit may not work in the remote
mode.
OPT.
SYNC
ZOOM
SYNC
LEARN
P 1/1
SERVO
P 1/1
SERVO
+