User Manual

163
k
10.3.2 Pre-flash suppression or
synchronisation settings
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to select the desired syn-
chronisation mode.
Synchronisation without pre-flash
Synchronisation with pre-flash
• Press the
°  button and confirm the selected
setting.
The mode of operation is adopted.
If the synchronisation set here does not work pro-
perly, then proceed as described in 10.3.4.
OPT.
SYNC
10.3.3 Servo mode partial light output settings
• Use the  buttons to set the desired partial
light output (P).
The partial light output is adopted.
Once the slave flash units have achieved flash-rea-
diness, the AF measurement flash flashes.
Remote channels cannot be set in SERVO mode.
The camera flash unit may not work in the remote
mode.
10.3.4 Learn function
The “Learn function” enables individual automatic
adjustment of the slave flash unit to the flash tech-
nology of the camera’s flash unit.
In the process, one or more pre-flashes, e.g. to
reduce the “red-eye effect” of the camera flash unit
can be taken into account.
The slave flash unit is then fired to coincide with the
main flash that illuminates the actual picture.
If the camera’s own flash device provides for auto-
matic focussing AF measuring flashes, then due to
the system characteristics no learn operation is
possible.
If possible, use another camera mode or change to
manual focussing.
P 1/1
SERVO
+
+
OPT.
SYNC
ZOOM
SYNC
LEARN
P 1/1
SERVO
+