User guide

7
CHAPTER 1
Laptop
Network Crossover Cable
Network Crossover Cabe
Twisted Pair Network Cable
i.Lon 10
Static IP Address
Loudspeakers
(1-50)
Twisted Pair Network Cable
RMS Workstation
Ethernet Cat 5 Patch Cable
Twisted Pair Network Cable
3Com
OFFICE
CONNEC T
PWR
Alert
Switch140
1
2
3
4
PortStatus
1
2
3
4
Activity
10BASE-T
green= link OK y ellow= Packet
Port
Status
Activity
100BASE-TX
Network Switch
i.Lon 10
Static IP Address
i.Lon 10
Static IP Address
Ethernet Cat 5 Patch Cable
Loudspeakers
(1-50)
Loudspeakers
(1-50)
Twisted Pair Network Cable
Figure 1.5. Closed Ethernet-based network configuration with multiple iLons
Figure 1.4. Simple closed Ethernet-based network configuration
Ethernet
Figures 1.4 through 1.6 on the following pages show
various network configurations for a simple Ethernet-based
network configuration.
NOTE: An Ethernet-based RMS system is
more complex from a design standpoint
and must conform to Ethernet network design
specifications (beyond the scope of this guide). A
general knowledge of Ethernet networks is very
helpful if you plan to deploy an Ethernet-based
system.