User guide

26
CHAPTER 3
Removing and Importing a Network Database
You can remove an existing RMS database as well as
import saved databases or databases you want to copy
between different computers.
Removing a Network Database
Perform the following steps to remove an RMS database:
1. Launch RMS and open the RMS Network Manager.
2. Highlight the database you wish to remove. Keep in
mind the following RMSNET identification system:
■ RMSNET - PCC-10 or the PCLTA20 network
interface
■ RMSNET1, RMSNET2...RMSNETXX – i.LON 10
network interface
NOTE: If no network card is present, the
first i.LON 10 will use RMSNET and the next
i.LON 10 will use as its default folder RMSNET2.
3. Click Remove. You will be prompted to acknowledge
the removal of this database. Click Yes.
4. The RMS Network Remove Service dialog appears.
Click Yes. RMS will automatically rename the
database with a date/time stamp, so that the network
will no longer recognize it.
5. The database is no longer recognized in the RMS
Network Manager, however it still exists in date-
stamped form in the C:\meyer\rms folder on your
hard drive.
Database removed from network