User guide

36
CHAPTER 3
Initializing the i.LON 10 into the RMS Database
1. Launch RMS and open the Network Server and
Manager, then open the Network Manager. Click Add.
2. In the Network Types section, click the Remote
network (RMSNETx) accessed with an i.Lon
Remote Network Interface radio button.
3. Type in the sequential number of the i.LON 10 on the
network in the Assigned Network Number field. For
example, an i.LON adapter named ilon-1 with an IP
address of 192.168.1.101 means you would type a 1.
4. Click Add Network and initialize the database. The
RMS Initialization Service warning dialog appears.
Accepting this warning acknowledges that you
understand you will be creating a new RMSNET
database and that a folder will be created that will be
associated with that i.LON 10 in C:\meyer\rms folder.
5. Click Yes to dismiss the warning dialog. The Network
Server and Manager will shut down and reopen,
initializing the database and the i.LON 10.
6. When the Network Server and Manager reopens, you
will see the new i.LON 10 initialized on the network.