User guide

38
CHAPTER 4
3. Click OK to add the new Page. The new Page appears
as a new tab to the right of the last Page created and
becomes the current Page.
The following keyboard shortcuts are useful for navigating
multiple Pages:
■ Press Tab to cycle through the Pages from left to right.
■ Press Shift-Tab to cycle through the Pages from right
to left.
■ Use the number keys to select Pages 1-10.
TIP: When monitoring loudspeakers, limit-
ing, excursion and abnormal conditions for
any loudspeaker on a Page will propagate to that
Page tab. This is a good first-level troubleshooting
indicator.
Deleting a Page
To delete a Page, perform the following steps:
1. From the Panel menu, click Delete Page. The Delete
Page and Loudspeakers Views dialog appears.
2. Click Yes to delete the Page.
CAUTION: The loudspeakers on a Page
that you delete will not be decommissioned.
Renaming a Page
To rename a Page, perform the following steps:
1. From the Panel menu, click Rename Page. The Enter
Page Name dialog appears.
2. Type in a new name for the Page, then click Yes to ap-
ply the change.
NOTE: A Page name cannot be greater
than 10 characters long.
Adding and Commissioning a Loudspeaker
Once you’ve created a Page, the next step is to add the
loudspeakers you want to monitor. Once added, you com-
mission the loudspeaker to establish a link between it and
the RMS application. You can also remove the loudspeak-
er and/or decommission it from the your network.
The Add menu (Figure 4.2) contains all Meyer Sound self-
powered loudspeakers compatible with RMS.
Figure 4.2. All RMS-equipped loudspeakers appear in the Add menu.