User guide

48
CHAPTER 4
You can freely add loudspeakers anywhere in the matrix
and name each column according to your system configu-
ration. To set up the Solo/Mute Matrix, do the following:
1. From the Muting menu bar, you click on Solo/Mute
Matrix. The Solo/Mute Matrix dialog appears.
2. Right-click on a column head and choose Name Col-
umn. The Name Control Column appears.
3. Enter a name for the column, then click OK.
4. Right-click on any cell and choose Add. A dialog
appears listing all of the available loudspeakers in the
Panel.
5. Select one or more loudspeakers and click Add.
If you selected one loudspeaker, it appears in the selected
cell. If you chose more than one loudspeaker, the loud-
speakers will appear in contiguous cells down the select-
ed column (Figure 4.12).
Figure 4.12. Multiple MILO loudspeakers in a matrix
TIP: You can add the same loudspeaker
more than once, allowing loudspeakers to
be members of multiple column groups.
To delete a loudspeaker from the matrix, select the loud-
speaker, right-click on its cell and choose Remove. The
loudspeaker will instantly be deleted from the matrix.
CAUTION: When a loudspeaker is deleted,
it leaves an empty cell in the matrix. To
close this gap in a column, right-click on the col-
umn head and click Shift Entries Up.