User guide

CHAPTER 4

The Options Menu

Status Bar

The Status Bar shows the polarity convention used for the

current panel, whether muting is enabled/disabled, and

how many loudspeakers of the total in the panel are online.

The Status Bar will show 2+/3+ if both polarity settings are

detected. Click Options, Status Bar from the Menu Bar to

display the Status Bar at the bottom of the RMS window.

Background

You can change the RMS window background to different

colors and patterns. Click Options, Background from the

Menu Bar to open the Background dialog, as shown in

Figure 4.13.

Figure 4.13. The Background dialog

Network Setup

Choose Options, Network Setup from the Menu Bar

to open the RMS Network Setup dialog. Select LNS or

Legacy to identify the network system you are using.

Title

Choose Options, Title from the Menu Bar to open the

Set Title Type dialog. This dialog determines whether the

device name or speaker title appears in the title bar of the

speaker view.

UX Attenuation Range

The UX Attenuation Range dialog is used speciﬁcally

for setting the attenuation ranges for UltraSeries model

loudspeakers UPA-1P, UPA-2P, UM-1P, UM-100P, USM-

1P and USW-1P. The dialog allows you to set the range to

either 0 to –18 dB or 0 to -12 dB.

Figure 4.14. The UX Attenuation Range dialog

TIP: All Meyer Sound loudspeakers that

use a UX or UPM ampliﬁer can use the UX

Attenuation Range dialog. These include:

■ UPA-1P

■ UPA-2P

■ USW-1P

■ UM-1P

■ UM-100P

■ USM-1P

■ USM-100P

■ M2D

■ UPM-1P

■ UPM-2P

■ UMS-1P