Speaker User Manual

ManualsBrandsMeyer Sound ManualsSpeakerUMS-SM

OPERATING INSTRUCTIONS ADDENDUM ULTRASERIES

UMS-SM SINGLE MOUNT SUBWOOFER

The UMS-SM subwoofer is a version of the UMS-1P sub-

woofer with threaded end plates for single-mount configura-

tions with the UMS-SM U-bracket. The UMS-SM end plates

are factory-installed (with the U-bracket) and not available

as an upgrade option for the UMS-1P. The UMS-SM retains

the same acoustical and electrical characteristics of the

UMS-1P.

NOTE: The UMS-SM mounting plates come

standard with the unit and are factory-installed

the U-bracket. The end plates are not available as an

upgrade option for UMS-1P subwoofers.

NOTE: For complete information on the electri-

cal and acoustical characteristics of the

UMS-SM, refer to the UMS-1P Operating Instruc-

tions.

Important Safety Considerations for Rigging!

When installing Meyer Sound loudspeakers, the following

precautions should always be observed:

■ All Meyer Sound products must be used in accordance

with local, state, federal, and industry regulations. It is

the owner’s and user’s responsibility to evaluate the reli-

ability of any rigging method for their application. Rigging

should only be carried out by experienced professionals.

■ Use mounting and rigging hardware that has been rated

to meet or exceed the weight being hung.

■ Make sure to attach mounting hardware to the building's

structural components (studs or joists), and not just to

the wall surface. Verify that the building's structure and

the anchors used for the installation will safely support

the total weight of the mounted loudspeakers.

■ Use mounting hardware appropriate for the surface

where the loudspeaker will be installed.

■ Make sure bolts and eyebolts are tightened securely.

Meyer Sound recommends using Loctite

on eyebolt

threads and safety cables.

■ Inspect mounting and rigging hardware regularly. Imme-

diately replace any worn or damaged components.

UMS-SM Dimensions with U-Bracket

25.24

[641.00mm]

23.27

[591.00mm]

11.93

[303.00mm]

20.92

[531.34mm]

16.34

[415.16mm]

3.22

[81.68mm]

22.75

[577.85mm]

17.13

[435.10m

3.94

[100.00mm]

16.00

[406.40mm]

2.99

[76.00mm]

UMS-SM Subwoofer with U-Bracket

Summary of content (2 pages)

PAGE 1
OPERATING INSTRUCTIONS ADDENDUM ULTRASERIES UMS-SM SINGLE MOUNT SUBWOOFER 23.27 [591.00mm] 11.93 [303.00mm] 16.00 [406.40mm] 20.92 [531.34mm] 16.34 [415.16mm] 3.94 [100.00mm] 17.13 [435.10m 2.99 [76.00mm] 3.22 [81.68mm] 22.75 [577.85mm] 25.24 [641.00mm] UMS-SM Dimensions with U-Bracket The UMS-SM subwoofer is a version of the UMS-1P subwoofer with threaded end plates for single-mount configurations with the UMS-SM U-bracket.
PAGE 2
THE UMS-SM U-BRACKET UMS-SM U-Bracket Load Ratings The UMS-SM U-bracket mounts a single UMS-SM subwoofer on walls and ceilings. The U-bracket has two sets of attachment points that determine how closely the UMS-SM is mounted to the surface. The subwoofer can also be tilted as necessary to affect coverage. The UMS-SM U-bracket has four 1/4” corner mounting holes for attaching the bracket to mounting surfaces.