Instructions / Assembly

Installation Instructions
Part No. 08271 Home Plow Snow Shoe Kit
© 2012 Printed in the U.S.A.
The Home Plow
18513 Euclid Ave. • Cleveland, Ohio 44112-1084
Phone 877-412-PLOW (7569)
email [e-mail]
The Home Plow assumes no responsibility for installations not made in accordance with these instructions.
The Home Plow reserves the right, under its continuing product improvement program, to change construction or design details, specifications
and prices without notice or without incurring any obligation.
Form 1-1008
February 2012
Item Part No. Qty Description
08271 1 Home Plow Snow Shoe Kit
09127 2 • Mushroom Shoe Assembly
1 10853 1 •• Runner
2 20359 15 •• Flatwasher 3/4”
3 22083 1 •• Lynch Pin
4 13308 2 • Runner Bracket
08273 1 • Hardware bag
5 20072 4 •• Bolt H 7/16-14 x 1-1/4”
6 20304 4 •• 7/16-14 Locknut
Installation
A. Position Runner Bracket (4) to Plow as shown and
fasten using 7/16-14 x 1-1/4” Bolt (5) and 7/16-14
Locknut (6).
B. Slide Runner (1) thru the bottom of Runner Bracket (4)
as shown. Use the Flatwashers (2) to adjust Runner
Height. Proper height is attained when the cutting edge
of the plow is 1/4” to 1/2” off the ground. Place the extra
Flatwashers (2) on top of Runner Bracket (4) in order to
limit up and down movement of the shoe in the bracket.
C. Install Lynch Pin (3) to Runner (1).
1
2
3
4
5
6
Parts List
Parts indented are included in the assembly under which they are
indented.