Replacement Part List

ManualsBrandsMeyer ManualsKitchen6 ft. 1.5 cu. yd. Stainless Steel Insert Hopper Spreader

PV SERIES

INSTALLATION AND INSTRUCTIONAL MANUAL

xxxxx-xxx-xx month/day/year

PV SERIES

MATERIAL:

SCALE

TITLE

DRAWING SIZE

DRAWING No:

LINDENWOOD ILLINOIS

WHERE USED

CADD FILENAME:

REF. DRAWING

DR BY

APPV BY

DATE

APPVBYDATEPIF#

REV

REVISION

NOTED)

(EXCEPT AS

DO NOT SCALE DRAWING

DATE

*********************

ProE Drawing

This drawing was

created in ProE.

The orginial drawing

should only be

edited in ProE.

*********************

1.000

.500

1.000

3.500

1.000

00002-562-00

DETAIL, ASSEMBLY

PV356 B&S

SHEET 1 OF 2

SEE TABLE

PV356

S:\00002\

00002-562-00

D0000253300

0.100

JKG 5/19/2010

TABD

PART WEIGHT

ITEM PART NUMBER DESCRIPTION QTY

1 00115-156-XX WELD, HOPPER 1

2 04049-045-00 DECAL, CAUTION 1

3 04111-053-00 CAP, IDLER 2

4 04616-126-00 WIRE, BROWN JUMPER 4" 1

5 04638-043-06 CONNECTOR, BUTT 2

6 04003-806-13 NUT, 5/16 SER FLANGE SS 18

7 00123-147-00 PV356 SHIPPING CARTON 1

8 00115-124-00 WELD, TAKEUP BOLT 2

9 04003-802-XX NUT, 1/2" HEX JAM 4

10 00118-337-00 SUB- Y, GEARBOX 1

11 04003-005-XX BOLT, 1/2" X 3/4" HH 4

12 04004-001-XX LOCKWASHER, 1/2" 4

13 00119-590-01 FORM, GUARD, CONVEYOR 1

14 04003-804-XX LOCKNUT, 3/8" VINYL 3

15 04004-002-XX FLATWASHER, 3/8" 4

16 04003-003-XX BOLT, 3/8" X 1 1/4" HH 7

17 04003-806-XX NUT, 3/8" SER FLANGE 8

18 04043-079-00 WELD, DRAG CHAIN 1

19 04003-032-06 BOLT, 5/16 X 3/4 CA 18

20 04067-033-00 BOOT, ALT CABLE 2

21 00122-946-XX FORM, CONVEYOR FLOOR 1

22 04071-020-00 V-BELT, BX-46 1

23 04616-120-00 CABLE, SPREADER CONTROL 1

24 04616-105-00 WIRE, REM. BATT. NEGATIVE 1

25 04003-002-XX BOLT, 5/16 X 3/4 HH 1

26 04622-008-00 COVER, CLUTCH 1

27 00104-822-XX RETAINER, CLUTCH 1

28 04003-001-XX BOLT, 1/4" X 3/4" HH 4

29 04003-806-XX NUT, 1/4" SER FLANGE 5

30 04145-076-00 ENGINE, 190CC B&S QUANTUM 1

31 04031-009-00 KEY, 3/16" X 1" SQ 1

32 04070-024-00 PULLEY, DRIVER 1

33 04616-103-00 WIRE, REM. BATT. POS. 1

35 04093-022-00 GROMMET 1

36 04146-005-00 SOLENOID 1

37 04607-027-00 CLAMP, CUSHIONED 1

38 00110-819-XX WELD, FEEDGATE 1

39 04624-001-01 KNOB, HAND 1

40 00119-587-XX WELD, SHROUD 1

41 00112-734-00 ROD, PROP 1

42 04010-016-01 PIN, 1/8" X 1" COTTER SS 1

43 04049-182-00 DECAL, DANGER 3

44 04049-199-00 DECAL, GASOLINE ONLY 1

45 04049-XXX-XX DECAL, SERIAL NUMBER 1

46 04093-021-00 TRIM, VINYL 2

47 04553-008-06 SKID, PV 6' 1

48 04003-033-14 BOLT, 3/8" X 4" CA SS 2

49 04605-155-00 CABLE, LIGHT POWER 1

50 04605-154-00 GROMMET, MTG. 1

51 04540-003-00 OIL, MOTOR .156

52 00118-312-XX FORM, FEEDGATE HANDLE 1

53 04605-153-00 LAMP, STOP 1

54 04003-033-12 BOLT, 3/8" X 3/4" CA SS 1

55 00101-636-XX BAR, PIVOT 1

56 04045-022-00 PIN, CONNECTOR W/ COTTER 2

ITEM PART NUMBER DESCRIPTION QTY

57 04076-100-00 WIPER, CHAIN 1

58 04070-020-00 PULLEY, DRIVEN 1

59 04138-017-00 CLUTCH, ELECTRIC 1

60 00108-771-00 FLATWASHER, CLUTCH RETAINER 1

61 04004-001-XX LOCKWASHER, 5/16" 3

62 04003-081-04 SCREW, 5/16" X 5/8" SH CAP 3

63 04607-028-00 CLAMP, PROP ROD 1

64 04049-357-00 DECAL, ENGINE WARRANTY 1

65 04049-362-00 DECAL, FUEL SHUT OFF 1

66 04150-044-01 ACTUATOR, 12V 1

67 00117-410-00 LINKAGE, HONDA THROTTLE 1

68 04003-069-01 SCREW, 8-32 X 3/4" PR SS 3

69 04004-002-59 FLATWASHER, #8 SS 3

70 04003-804-28 LOCKNUT, 8-32 VINYL SS 3

71 04607-013-00 TIE, NYLON 5

72 00002-296-XX P, SPINNER PV INT. 1

73 04049-XXX-XX DECAL, BRAND 3

74 SEE B/M P, INSTR. MANUAL 1

75 04003-033-XX BOLT, 3/8" X 1 1/4" CA 1

76 04009-001-01 KEY, WOODRUFF 1

77 04111-052-00 COVER, FEEDGATE HANDLE 1

78 04003-002-XX BOLT, 5/16" X 1 1/2" HH 2

79 04607-036-00 HOLDER, NYLON TIE 2

80 04003-001-XX BOLT, 1/4" X 1" HH 1

81 00122-366-00 SHAFT, IDLER 1

82 00122-369-00 ROLLER, POLY 2

83 00122-948-XX ADAPTER, ENGINE 1

84 04003-002-XX BOLT, 5/16" X 2 1/2" HH 1

85 04616-081-00 WIRE, 12 GA. RED .75

86 04616-077-00 WIRE, 12 GA BLACK .75

87 04638-039-18 TERMINAL, 5/16" RING 1

88 04638-039-19 TERMINAL, 1/4" RING 1

89 00122-949-XX FORM, CHAINSHIELD 2

90 04003-032-XX BOLT, 5/16" X 3/4" CA 4

91 04003-806-XX NUT, 5/16" SER FLANGE 7

SEE CHAIN TENSION DETAIL

ON SHEET 2

DETAIL, IDLER ASSEMBLY

SCALE 0.250

DETAIL, FEEDGATE,

HANDLE ASSEMBLY

& DECALS

ITEMS NOT SHOWN:

EA. SIDE

WIPER MUST BE ADJUSTED TO

ADEQUATELY CLEAN CHAIN BARS

00123-147-00

04540-003-00

00002-296-XX

INSTR. MANUAL

SEE B/M

8 9

6 19

NOTE:

1. ITEM #7 MUST BE PLACED INTO

PLASTIC BAG AND PACKED INTO

HOPPER FOR SHIPPING.

2. ITEM #72 MUST BE PACKED INTO

HOPPER FOR SHIPPING.

INSTALL ITEM #89 WITH VERTEX OF

BEND POINTING TOWARDS INSIDE

OF HOPPER

DECAL TO BE CENTERED ON

BOTH SIDES OF ITEM #1

15 16 17 57

16 17

DECAL CENTERED ON

BACK OF HOPPER

83 90 91

84 91

78 91

31 32

6 19

15 42

14 75

15 39 54

14 16 17

52 77

11 12

16 17

ZERK IN BEARING

TO AIM FORWARD

& UPWARD

17 47 48

41 63

49 50 53

14 16

BASE LINE PV SERIES

Summary of content (13 pages)

PAGE 1
INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES 3 BASE LINE PV SERIES 82 81 DETAIL, IDLER ASSEMBLY SCALE 0.
PAGE 2
xxxxx-xxx-xx 1.000 1.000 3 13 SEE CHAIN TENSION DETAIL ON SHEET 2 43 EA. SIDE DECAL TO BE CENTERED ON BOTH SIDES OF ITEM #1 73 BASE LINE PV SERIES 16 17 57 6 19 WIPER MUST BE ADJUSTED TO ADEQUATELY CLEAN CHAIN BARS 15 18 56 16 35 17 6 19 8 9 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES month/day/year .
PAGE 3
6 19 88 ITEMS NOT SHOWN: 19 7 00123-147-00 72 00002-296-XX INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES 51 04540-003-00 8 74 INSTR. MANUAL SEE B/M 9 ASSEMBLY 0.250 04003- 00122- 81 00122- 80 04003- 79 04607- 78 04003- 1. ITEM #7 MUST BE PLACED INTO PLASTIC BAG AND PACKED INTO HOPPER FOR SHIPPING. 77 04111- 76 04009- 2. ITEM #72 MUST BE PACKED INTO HOPPER FOR SHIPPING.
PAGE 4
INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES 56 55 DECAL CENTERED ON BACK OF HOPPER 1.000 3.500 1.000 54 53 30 1.000 1.000 52 51 50 49 .500 48 47 83 90 46 91 45 44 43 22 78 42 91 84 91 6 19 89 INSTALL ITEM #89 WITH VERTEX OF BEND POINTING TOWARDS INSIDE OF HOPPER 41 40 39 38 37 31 32 ITEMS NOT SHOWN: 7 00123-147-00 51 04540-003-00 8 72 00002-296-XX 74 INSTR.
PAGE 5
xxxxx-xxx-xx 3 81 13 SEE CHAIN TENSION DETAIL ON SHEET 2 82 16 17 57 19 18 14 16 49 50 month/day/year 40 53 DETAIL, IDLER ASSEMBLY SCALE 0.
PAGE 6
xxxxx-xxx-xx WHITE 4 REMOVE 4" EXTENSION SUPPLIED WITH ITEM #23, AND DISCARD CONNECT TO ENGINE KILL WIRE (NEAR SPARK PLUG) WHITE FROM ITEM #59 35 86 24 BROWN GREEN / BLACK CONNECT TO THROTTLE ACTUATOR 29 29 29 80 ROUTE THREE WIRES THRU ITEM #35 28 36 BLACK WHITE FROM ITEM #23 REF. STARTER HARNESS BLACK DETAIL, GROUND WIRING SCALE .250 CONNECT ALL FOUR GROUND WIRES (BETWEEN FLANGE NUTS, ON UNDERSIDE OF ENGINE PLATE) TO SAME SOLENOID MTG. BOLT 5.
PAGE 7
INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES BASE LINE PV SERIES TOR & EMBLY 0 68 69 TOP OF SHROUD 70 INSIDE OF SHROUD FINGERS OF ITEM #63 MUST BE COMPLETELY THRU ITEM #40 36 63 40 28 29 DETAIL, PROP ROD CLAMP ASSEMBLY SCALE 1.125 29 29 8.0 M 20.0 M DETAIL, CH SCALE 80 67 83 79 ROUTE THREE WIRES THRU ITEM #35 23 71 ENGINE MOUNTING PLATE (TOP VIEW) DETAIL, CABLE CLAMP SCALE .375 TE FROM M #23 28 29 37 25 60 20.000± .
PAGE 8
xxxxx-xxx-xx 86 REF. STARTER HARNESS BLACK 24 INSTALL PROTECTIVE CAP AFTER RUN TESTING SPREADER 23 GREEN / BLACK CONNECT TO THROTTLE ACTUATOR BROWN 29 80 ROUTE THREE WIRES THRU ITEM #35 29 (REF) SINGLE POLE WEATHER PACK CONNECTOR ITEMS #23 & #59 BLACK WHITE FROM ITEM #23 67 83 BLUE GROUND CLUTCH YELLOW (TO CENTER STUD ON SOLENOID) RED 36 CONNECT TO SOLENOID CONNECT TO GROUND (REF) FUSE HOLDER W / 15A FUSE BASE LINE PV SERIES 35 DETAIL, GROUND WIRING SCALE .
PAGE 9
INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES BASE LINE PV SERIES TOP OF SHROUD BOTH SIDES OF CHAIN TAKEUP MUST BE ADJUSTED EVENLY INSIDE OF SHROUD EM #63 PLETELY 63 40 DETAIL, PROP ROD CLAMP ASSEMBLY SCALE 1.125 8.0 MIN 20.0 MAX POINT WHERE CHAIN CONTACTS FLANGE ON LONGITUDINAL DETAIL, CHAIN TENSION SCALE 0.250 29 23 27 26 71 ETAIL, CABLE CLAMP SCALE .375 28 29 37 25 60 28 ± .
PAGE 10
INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES ITEM PART NUMBER 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 xxxxx-xxx-xx 62690 62189 64415 62268 62752 62944 64086 62940 64416 62106 62640 64244 62743 62695 63565 62638 63264 62772 62750 63117 62336 62304 64417 62641 64418 64419 64064 62007 64420 DESCRIPTION QTY NUT, 1/4” SER FLANGE BOLT, 1/4” X 3/4” HH RETAINER, CLUTCH COVER, CLUTCH BOLT, 5/16 X 3/4 HH WIRE, REM. BATT.
PAGE 11
INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 59 61176 CLUTCH, ELECTRIC 58 61161 PULLEY, DRIVEN 57 62354 WIPER, CHAIN 56 61174 PIN, CONNECTOR W/ COTTER 55 62270 BAR, PIVOT 54 62746 BOLT, 3/8” X 3/4” CA SS 53 62714 LAMP, STOP 52 63828 FORM, FEEDGATE HANDLE 51 63880 OIL, MOTOR 50 62715 GROMMET, MTG.
PAGE 12
INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES ITEM PART NUMBER 79 64411 78 62273 77 64164 76 61201 75 62813 74 63156 73 72 71 70 69 68 67 66 65 64 63 62 61 60 xxxxx-xxx-xx 64412 62183 62650 62651 62649 62720 63165 62643 62644 62725 62634 63009 63103 DESCRIPTION HOLDER, NYLON TIE BOLT, 5/16” X 1 1/2” HH COVER, FEEDGATE HANDLE KEY, WOODRUFF BOLT, 3/8” X 1 1/4” CA P, INSTR. MANUAL DECAL, BRAND Meyer QTY 2 2 1 1 1 1 3 P, SPINNER PV INT.
PAGE 13
INSTALLATION AND INSTRUCTIONAL MANUAL PV PV SERIES SERIES BASE LINE PV SERIES ITEM 91 90 89 88 87 86 85 84 83 82 81 80 ITEM 7 44 51 65 72 74 xxxxx-xxx-xx PART NUMBER 63310 63305 64405 64406 64407 64408 64409 63249 64410 64063 64062 63586 64417 62768 63880 62643 64412 DESCRIPTION NUT, 5/16” SER FLANGE BOLT, 5/16” X 3/4” CA FORM, CHAINSHIELD TERMINAL, 1/4” RING TERMINAL, 5/16” RING WIRE, 12 GA BLACK WIRE, 12 GA.