Operating instructions

ManualsBrandsMeyer Manualsaudio & home theatreUPM-1XP

ULTRA XP OPERATING INSTRUCTIONS

MOUNTING YOKES

The following mounting yokes are available for the UPJ-1XP, UPJunior-XP, UPM-1XP, and UPM-2XP loudspeakers. The

yokes suspend a single loudspeaker and allow a wide range of horizontal and vertical adjustment. The yokes for the

UPJ-1XP and UPJunior-XP attach to the bottom end plate. The yokes for the UPM-1XP and UPM-2XP attach to the top and

bottom nut plates and include both

3/8”-16 and M10 hardware. A “C” or “G” hanging clamp and steel safety cable (not included)

are required to suspend the loudspeakers with yokes.

Ultra XP Mounting Yokes

Model Supported

Loudspeakers

Maximum Num-

ber of Cabinets

Loudspeaker

Attachment

Mounting Options/Notes

MYA-UPJ

(PN 40.134.035.01)

UPJ-1P

UPJ-1XP

1 Bottom

■ Requires “C” or “G” hanging clamp and

steel safety cable

■ Accommodates hanging clamps with

standard 1/2” (12 mm) bolts

MYA-UPJunior

(PN 40.173.044.01)

UPJunior

UPJunior-XP

1 Bottom

■ Requires “C” or “G” hanging clamp and

steel safety cable

■ Accommodates hanging clamps with

standard 1/2” (12 mm) bolts

MYA-UPM

(PN 40.084.038.01)

UPM-1P,

UPM-2P,

UPM-1XP,

UPM-2XP

1 Top/Bottom

■ Requires “C” or “G” hanging clamp and

steel safety cable

■ Accommodates hanging clamps with

standard 1/2” (12 mm) bolts

■ Includes both 3/8”-16 and M10 hard-

ware

■ Secure the yoke by tightening the bot-

tom bolt first and then the top

■ Do not overtorque the bolts as this may

damage the cabinet

Figure 2: MYA-UPJ Mounting Yoke (Left), MYA-UPJunior Mounting Yoke (Center), MYA-UPM Mounting Yoke (Right)